Thinking about where to position your newly acquired home theatre? Vantage Point brings to you a five pack Satellite speaker mount for home theatres. You can shop online SATS05B Satellite Speaker Mounts by Vantage Point and position your speakers in the most appropriate ways.
The satellite speaker mounts are ideal for any home theatre with satellite speakers. This product is made compatible with most major brands of speakers. These mounting brackets include keyhole adopters for mounting those speakers which use keyhole mounting system. It is very important to position the home theatre in proper positions to get the best results. Therefore these mounting brackets are 4-axis adjustable, letting you position the speakers in the most appropriate way. These mounting brackets can support up-to 8 lbs and is available in rich black colour. The dimension of these brackets is 27.9 cm x 30.5 cm x 10.2 cm thus allowing you to fix them in any wall. These are a pack of five individual mounting brackets thus supporting up-to 5.1 home theatres.
The mounting brackets come in a pack of five individual mounts
Key-hole adopters included to accommodate key-hole mounting speakers.
Can be used for major brands of speakers
For optimal sound quality, the brackets allow four axis positioning
The brackets support speakers weighing up to 8 pounds.
Direction to mount
If your speakers support single hole mounting, then you will require to use M5 x 20mm machine screw in combination with M5 x 1/8" plastic washer. The plastic washer acts as a spacer between the threaded insert and the mount brackets. It is very crucial to use the washer correctly, otherwise the threaded insert may pull out from the speaker housing. Once the required configuration is achieved, you need to secure the brackets to the speaker. Check the size of the hole and determine the size of the screws that need to be used. After determining the correct size, you need to place the screw through the bracket and attach to the rear of the speaker enclosure. If the screw does not tighten up properly, use a washer to tighten up but do not leave it loose as the pressure will result in chipping of the bracket.
If your speaker has a key-hole design, you need to use the 8-32 x 5/8 machine screws in combination with the 8-32 round key-hole nut. Firstly, you need to preassemble the speaker mount bracket with the 8-32 x 5/8" machine screw and key-hole nut. You need to install the key-hole nut with the knurled edge toward the post and engage the key hole nut into the key hole slot. While tightening the speaker mount, apply tension on the assembly by gently pulling back the speaker mount. If the speaker does not tighten securely, use the M5 x 1/8" plastic washer as a spacer under the head of the 8-32 x 5/8" machine screws. Drill or screw the speaker with much care. Be sure not to damage the internal parts while drilling. You should not drill the hole more than œ" depth.
So what are you waiting for? Grab a SATS05B Satellite Speaker Mount and enjoy quality sound right at your abode. You can buy online SATS05B Satellite Speaker Mounts by Vantage Point till the stock lasts.